Rental Turnover
Punch list work between guests: locks reset, walls touched up, blinds and furniture repaired, photo report on completion.
Furniture Assembly in Palm Beach County
Flat pack built properly, anchored where it needs to be, and the boxes taken away.
What is included
- Beds, bunk beds, and headboards
- Wardrobes, dressers, and chests anchored to the wall
- Bookcases, media units, and display shelving
- Desks, office chairs, and standing desk frames
- Dining sets, bar stools, and occasional tables
- Patio and pool area furniture including umbrella bases
- Storage and utility shelving units
- Levelling on uneven tile and adjusting doors and drawers to sit square
- Breaking down and removing all packaging
How the job runs
- Step 1
Unbox and check the parts
We open everything and count hardware against the manual before starting. Missing or damaged parts get found at the beginning, when you can still call the retailer, rather than at the last step with a half built wardrobe in the middle of the room.
- Step 2
Build in place
Pieces get assembled where they are going to live, which matters in condo units where a built wardrobe will not fit through a bedroom door. We work on protection so nothing scratches tile, and we keep the room usable around us.
- Step 3
Level, anchor, and clear out
Everything levelled on the tile, drawers and doors adjusted to sit square, and anything tall anchored to the wall with the fastener the wall needs. Then all cardboard, foam, and plastic is broken down and taken away.
Assembly in a condo is not the same as assembly in a house
The practical constraints in Palm Beach County are mostly about buildings. Boxes have to come up in an elevator that may need padding and a reserved window. Cardboard has to go out through a service route on a day the building allows it. Many buildings will not let a delivery sit in a lobby, and some do not permit assembly work outside posted quiet hours.
We plan around all of that. If your building requires a certificate of insurance before anyone comes up, we send it ahead. If flat pack has been delivered and is stacked in your hallway blocking a neighbor's door, that is exactly the situation we get called for, and getting it built and cleared the same day is usually the goal.
Building it in the room it lives in
Older condo stock in this county, particularly units from the 1970s and 1980s in the big communities, has narrow interior doors and tight hallway turns. A tall wardrobe or a large media unit assembled in the living room frequently will not make it into the bedroom afterwards. That is a common and completely avoidable disaster.
So we build in place. It takes a little more care with protection under the work, and it means moving your existing furniture temporarily, but nothing has to be taken apart again. When a piece genuinely cannot be built in place, we say so before we start and plan the route.
Anchoring tall pieces, which is a safety issue
Anything tall and narrow, a wardrobe, a tall dresser, a bookcase, needs to be anchored to the wall. Manufacturers include a strap or a bracket for exactly this reason. In a home with children or grandchildren visiting, which describes most seasonal households here, it is not optional.
The Palm Beach County twist is the wall. If the anchor point falls on a CBS block exterior wall, the strap's supplied screw and plastic plug are useless and it needs a masonry fastener. If it falls on a framed partition, we anchor into framing. We check which one before drilling and we do not just screw into board and call it anchored.
Patio and pool furniture, and what the climate does to it
Outdoor furniture is a big part of what we assemble here, because almost every home and unit has a screened patio, a pool area, or a balcony. Two things are worth knowing. First, assemble it with the hardware supplied and torque it properly, because vibration and thermal cycling in this climate loosen bolts that were left just snug. Second, anything with an umbrella needs a base weighted for real wind, not the minimum on the box.
Storm season runs June 1 to November 30, and patio furniture is what turns into a problem in a strong wind. We are happy to point out which pieces should come inside or be secured when a storm is named, and for seasonal owners we can handle that as part of a close up visit.
Turnovers, arrivals, and doing it in one visit
Furniture assembly clusters around two moments. A rental turnover, where an owner has replaced a damaged piece and needs it built between guests. And the fall arrival window, October through December, when a seasonal owner has ordered furniture to be waiting when they land.
In both cases the value is doing it in one visit, including the packaging removal, which is genuinely the worst part for an owner in a building with restricted service access. If we are already there for a rekey, a TV mount, or touch up painting, adding assembly to the same visit avoids a second minimum charge. Buildings here also differ on when cardboard can go out, so if a delivery lands on a Friday afternoon in a community that restricts weekend service access, tell us at booking and we will schedule around it rather than leaving flattened boxes in your hallway.
Book it on a schedule
Packages that usually include this work.
Snowbird Open and Close
Two seasonal visits a year for absent owners. Open the house in October to December, close it in April or May.
Condo and HOA Program
A standing program for associations and management firms: unit turns, punch lists, painting, and lock work on one monthly invoice.
Where we work
We cover 39 cities, villages, and towns in Palm Beach County. These are the seven largest.
Furniture Assembly by city: West Palm BeachBoca RatonBoynton BeachDelray BeachPalm Beach GardensWellingtonJupiter
See all 39 service areasQuestions about this work
Do you take the boxes away?
Yes. All cardboard, foam, and plastic is broken down and removed. In condo buildings that is often the hardest part for an owner, because service routes and disposal areas have restricted hours and some buildings will not allow bulk cardboard in the regular chute. We plan the removal route before we start.
Can you build the furniture in the room it belongs in?
That is our default, and it matters in older Palm Beach County condos where interior doors and hallway turns are tight. A tall wardrobe assembled in the living room often will not fit into the bedroom afterwards. We build in place on floor protection and move your existing furniture temporarily as needed.
Will you anchor a tall dresser to the wall?
Yes, and we treat it as standard rather than optional, especially in homes where grandchildren visit. The Palm Beach County detail is the wall type: the plastic plug supplied in the box is useless in CBS block. We check whether the anchor point is block or framing and use the right fastener.
What happens if a part is missing from the box?
We find that at the start, because we open everything and count hardware against the manual before assembling anything. That gives you time to contact the retailer while the piece is still boxed, instead of discovering it at the final step. We can usually keep working on the other pieces meanwhile.
Can you assemble patio and pool furniture?
Yes, and it is a large share of what we build here. We torque the hardware properly, because heat cycling and vibration loosen bolts left just snug, and we will tell you if an umbrella base is too light for real wind. Patio pieces should be secured or brought in when a storm is named.
Can you do assembly on the same visit as other work?
Yes, and it is usually the cheaper way to do it. If we are already in the unit for a rekey, a TV mount, or touch up painting, adding assembly avoids a second trip and a second minimum. Tell us the full list when you book so we allow enough time in one visit.
Get a quote for furniture assembly
Tell us what you need done and roughly where in Palm Beach County you are. Photos help. We come back with a price, not a sales visit.